{"title":"Sealers","description":"","products":[{"product_id":"fluoroseal-water-based-penetrative-sealer","title":"FluoroSeal – Water Based Penetrative Sealer","description":"\u003cp\u003e\u003cstrong\u003eSAME DAY CLEAN \u0026amp; SEAL - 1 FLOOD COAT APPLICATION - Penetrating Sealer System\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eBuy 4 x 5L Concentrate and Save $165!\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eFluoroSeal is a water based fluoropolymer sealer used for sealing porous surfaces including natural stone, clay and concrete surfaces. Suitable for garages, walls, entertaining areas, kitchens and wet areas, pool surrounds, patios, driveways.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDilution \u0026amp; Coverage\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003eFluroSeal is supplied as a high-performance concentrate, designed to be diluted with water on site. This reduces transport weight and allows you to mix only the amount required for the project.\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cem\u003eDilution\u003c\/em\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e• 1 part FluroSeal concentrate : 3 parts clean water\u003cbr\u003e• 5L concentrate produces 20L of ready-to-use (RTU) sealer\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cem\u003eTypical Coverage\u003c\/em\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003eCoverage varies depending on the surface porosity and texture. Refer to coverage chart.\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e• Approx 5 m² per litre (RTU) on most concrete and masonry surfaces\u003cbr\u003e• 5L concentrate → 20L RTU → covers approximately 100 m²\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cem\u003eProject Example\u003c\/em\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003eA typical 100 m² driveway, patio or paved area can usually be sealed with one 5L bottle of FluroSeal Concentrate when diluted to 20L ready-to-use product.\u003c\/p\u003e\n\u003cp\u003eHighly porous surfaces may require additional product. Always apply a small test area to confirm coverage before commencing the full application.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey advantages\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSuperior oil and water repellence, providing excellent stain resistance\u003c\/li\u003e\n\u003cli\u003eReduces water ingress and minimises efflorescence in mineral substrates\u003c\/li\u003e\n\u003cli\u003eTransparent, natural finish - does not significantly change appearance\u003c\/li\u003e\n\u003cli\u003eHigh penetration into masonry surfaces\u003c\/li\u003e\n\u003cli\u003eHigh wear resistance, UV stable, long life\u003c\/li\u003e\n\u003cli\u003eFungal and algal resistance\u003c\/li\u003e\n\u003cli\u003eEasy to clean surfaces\u003c\/li\u003e\n\u003cli\u003eSubstrates remain breathable\u003c\/li\u003e\n\u003cli\u003eCan be applied to damp or wet substrates\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eRead the product information before application.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe surface to be treated should be clean and free of all contaminants.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eThe surface can be damp or wet, however FluoroSeal should not be applied to a surface that has pools of water. The pools should be removed using a broom or cloth prior to application.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDo not apply FluoroSeal if rain is expected within 24 hours of application. Do not apply if extreme weather conditions are expected. Do not apply if surface temperatures are above 30 degC. If necessary, cool the surface with water prior to application.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eFluoroSeal is ready to apply and should be mixed well before use.\u003c\/li\u003e\n\u003cli\u003eA test prior to application must be performed to assess the suitability of the product.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eFluoroSeal is best applied using a low-pressure sprayer. The surface should be uniformly applied to saturation point.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDo not allow pooling of sealer. Pools can be spread out using a soft bristled broom. Excess sealer must be removed before drying.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eProtect adjacent surfaces such as glass, metal or painted surfaces from any overspray.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eFull curing may take up to 24 hours. Avoid traffic for at least 24 hours.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eEquipment clean up can be performed with water.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"sifsealers","offers":[{"title":"5L Concentrate","offer_id":46481176527037,"sku":"FS-5C","price":519.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0760\/2241\/5549\/files\/5l_Fluoro_75e71430-2d00-4d60-b54a-e65005ea24b4.jpg?v=1772937807"},{"product_id":"sila-seal-water-based-penetrative-sealer","title":"SilaSeal – Water Based Penetrative Sealer","description":"\u003cp\u003e\u003cstrong\u003eSAME DAY CLEAN \u0026amp; SEAL - 1 FLOOD COAT APPLICATION - Penetrating Sealer System\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eBuy 4 x 5L Concentrate and Save $112!\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eSilaSeal is a water based silane-siloxane sealer used for sealing porous reconstituted and natural stone, clay and concrete materials. Suitable for garages, walls, roofs, entertaining areas, kitchens and wet areas, pool surrounds, patios, driveways. Not recommended for use on very dense substrates.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDilution \u0026amp; Coverage\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003eSilaSeal is supplied as a high-performance concentrate, designed to be diluted with water on site. This reduces transport weight and allows you to mix only the amount required for the project.\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cem\u003eDilution\u003c\/em\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e• 1 part SilaSeal concentrate : 3 parts clean water\u003cbr\u003e• 5L concentrate produces 20L of ready-to-use (RTU) sealer\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cem\u003eTypical Coverage\u003c\/em\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003eCoverage varies depending on the surface porosity and texture. See coverage charts.\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e• Approx 5 m² per litre (RTU) on most concrete and masonry surfaces\u003cbr\u003e• 5L concentrate → 20L RTU → covers approximately 100 m²\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003eProject Example\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003eA typical 100 m² driveway, patio or paved area can usually be sealed with one 5L bottle of SilaSeal Concentrate when diluted to 20L ready-to-use product.\u003c\/p\u003e\n\u003cp\u003eHighly porous surfaces may require additional product. Always apply a small test area to confirm coverage before commencing the full application.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey advantages\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSuperior water repellence, providing excellent water based stain resistance\u003c\/li\u003e\n\u003cli\u003eReduces water ingress and minimises efflorescence in mineral substrates\u003c\/li\u003e\n\u003cli\u003eTransparent, natural finish - does not significantly change appearance\u003c\/li\u003e\n\u003cli\u003eHigh penetration into masonry surfaces\u003c\/li\u003e\n\u003cli\u003eHigh wear resistance, UV stable, long life\u003c\/li\u003e\n\u003cli\u003eFungal and algal resistance\u003c\/li\u003e\n\u003cli\u003eEasy to clean surfaces\u003c\/li\u003e\n\u003cli\u003eSubstrates remain breathable\u003c\/li\u003e\n\u003cli\u003eCan be applied to damp or wet substrates\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eRead the product information before application.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe surface to be treated should be clean and free of all contaminants.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eThe surface can be damp or wet, however SilaSeal should not be applied to a surface that has pools of water. The pools should be removed using a broom or cloth prior to application.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDo not apply SilaSeal if rain is expected within 24 hours of application. Do not apply if extreme weather conditions are expected. Do not apply if surface temperatures are above 30 degC. If necessary, cool the surface with water prior to application.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSilaSeal is ready to apply and should be mixed well before use.\u003c\/li\u003e\n\u003cli\u003eA test prior to application must be performed to assess the suitability of the product.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSilaSeal is best applied using a low-pressure sprayer. The surface should be uniformly applied to saturation point.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDo not allow pooling of sealer. Pools can be spread out using a soft bristled broom. Excess sealer must be removed before drying.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eProtect adjacent surfaces such as glass, metal or painted surfaces from any overspray.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eFull curing may take up to 24 hours. Avoid traffic for at least 24 hours.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eEquipment clean up can be performed with water.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"sifsealers","offers":[{"title":"5L Concentrate","offer_id":46481179082941,"sku":"SS-5C","price":349.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0760\/2241\/5549\/files\/Sila_Seal_5_L_RTU_ce5040cf-3e60-49ec-8ee0-a13e653643a8.jpg?v=1773113835"},{"product_id":"sila-seal-enhance","title":"SilaSeal Enhance - Water Based Penetrating Sealer","description":"\u003cp\u003e\u003cstrong\u003eSAME DAY CLEAN \u0026amp; SEAL - 1 FLOOD COAT APPLICATION - Penetrating Sealer System\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSilaSeal Enhance is a ready to apply enhancer for aggregate and honed concrete and concrete pavers.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDarkens mortar and enhances stone in aggregate concrete based materials\u003c\/li\u003e\n\u003cli\u003eProvides superior water repellence and oil repellence\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eReduces efflorescence\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eHigh wear resistance, long life\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eUV stable\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eWater based\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eNon-film forming, allows breathability\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eFungal and algal resistance\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDoes not peel or blister\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eCan be applied to a damp\/wet surface\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSuitable on both horizontal and vertical surfaces\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eCan be spray applied\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSilaSeal Enhance is a ready to apply, and enhancer for aggregate concrete and concrete pavers\u003c\/p\u003e\n\u003cp\u003eRead the product information before application.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe surface to be treated should be clean and free of all contaminants.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eThe surface can be damp or wet, however SilaSeal Enhance should not be applied to a surface that has pools of water. The pools should be removed using a broom or cloth prior to application.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDo not apply SilaSeal Enhance if rain is expected within 24 hours of application. Do not apply if extreme weather conditions are expected. Do not apply if surface temperatures are above 30 degC. If necessary, cool the surface with water prior to application.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSilaSeal Enhance is ready to apply and should be mixed well before use.\u003c\/li\u003e\n\u003cli\u003eA test prior to application must be performed to assess the suitability of the product.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSilaSeal Enhance may be spray applied using a low-pressure sprayer. The surface should be uniformly applied to saturation point.  For dense and non-textured surfaces such as honed concrete and natural stone, sealer can be sprayed, then  buffed using a microfibre mop.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDo not allow pooling of sealer. Pools can be spread out using a soft bristled broom. Excess sealer must be removed before drying.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eProtect adjacent surfaces such as glass, metal or painted surfaces from any overspray.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eFull curing may take up to 24 hours. Avoid traffic for at least 24 hours.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eEquipment clean up can be performed with water.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"sifsealers","offers":[{"title":"20L","offer_id":46481179377853,"sku":"EN-20R","price":595.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0760\/2241\/5549\/files\/365Enhance5and20l_f50049de-7420-47fc-8e45-4d7a44f25cd2.jpg?v=1772937825"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0760\/2241\/5549\/collections\/Group_of_Sila_Seal.jpg?v=1772938047","url":"https:\/\/sifsealers.co.nz\/collections\/sealers.oembed","provider":"SiF Sealers NZ","version":"1.0","type":"link"}